Frequently Asked Questions

Yes — 100% free. No account, no subscription, no hidden fees. All calculators and the full panel comparison database are available to everyone at no cost. We're supported by display advertising.

No. SolarSpecHub is independently operated as an independent informational resource. We are not affiliated with, sponsored by, or paid by any solar installer, panel manufacturer, or financing company. Our revenue comes from display advertising only — not installer referrals or affiliate commissions.

No. All calculator inputs are processed entirely in your browser using JavaScript. We never transmit, store, or have access to the personal, financial, or location data you enter.

Our estimates are based on regional peak sun hours, typical system performance ratios (0.75–0.80), and current average utility rates from EIA data. Estimates are generally accurate within ±10–20% for most U.S. locations. Actual savings depend on your specific roof orientation, shading, local utility rate structure, and the exact system installed. A licensed installer will provide a site-specific assessment using professional software like Aurora or PVWatts.

A peak sun hour is one hour of sunlight at an intensity of 1,000 watts per square meter — the standard test condition for solar panels. It's the key factor determining how much electricity your panels will produce. Phoenix, AZ averages about 6.5 peak sun hours per day; Seattle, WA averages about 3.5. More peak sun hours = more electricity = bigger savings.

Many factors cause variation: your installer uses LiDAR roof modeling, shade analysis, and your exact utility rate schedule (including time-of-use rates, demand charges, and net metering policy). Our calculators use regional averages as approximations. If your installer's production estimate is significantly higher than ours, ask them to walk you through their assumptions — especially shading and performance ratio.

The ITC (26 U.S.C. § 25D) allows you to deduct 30% of the cost of a residential solar installation from your federal income taxes. For a $25,000 system, that's $7,500 off your tax bill. The 30% rate is locked in through 2032 under the Inflation Reduction Act. It steps down to 26% in 2033, 22% in 2034, and expires for residential installations in 2035.

The ITC is a non-refundable tax credit — meaning it reduces your tax liability dollar-for-dollar, but you won't receive the balance as a refund if the credit exceeds your tax bill. However, any unused portion rolls forward to future tax years. Consult a tax professional to understand how the credit applies to your specific tax situation.

Yes — under the Inflation Reduction Act, standalone battery storage systems installed after January 1, 2023 are also eligible for the 30% ITC, even if not paired with solar panels. Previously, batteries had to be charged by solar to qualify.

These are solar cell technologies with different efficiency and temperature characteristics:

Mono PERC — The current mainstream standard. Passivated Emitter and Rear Cell design captures light from both sides. Efficiency: 19–21%. Best price-per-watt value.

HJT (Heterojunction) — Combines crystalline and thin-film layers for superior low-light performance and very low temperature coefficients. Efficiency: 21–23%. Premium price, excellent for hotter climates.

TOPCon (Tunnel Oxide Passivated Contact) — The newest mainstream technology. Higher efficiency than PERC with competitive pricing as manufacturing scales. Efficiency: 21–23%. Increasingly the new standard.

Solar panels lose efficiency as they heat up. The temperature coefficient (Pmax) tells you how much power a panel loses for every 1°C above 25°C (test conditions). A panel with -0.26%/°C (like SunPower HJT) loses significantly less power on a hot 90°F day than one with -0.35%/°C. In hot climates like Arizona, Texas, or Florida, a lower temperature coefficient can meaningfully increase annual production.

Standard residential panels range from about 18% to 24% efficiency. Anything above 20% is considered high-efficiency. The efficiency rating affects how many panels you need for a given system size — a 22% panel produces more power per square foot than a 19% panel, which matters if roof space is limited. For most homeowners, high efficiency is worth the premium only when roof space is constrained.

We strongly recommend getting at least 3 quotes. Solar installation pricing varies significantly — sometimes by $5,000–$10,000 for the same system. Use our calculators to establish an independent baseline before talking to installers, so you can evaluate each quote against objective benchmarks rather than just comparing installers to each other.

Key factors: NABCEP certification (North American Board of Certified Energy Practitioners), at least 5 years in business, local reviews on Google and BBB, verified manufacturer authorization for the panels they're installing, and a detailed written proposal that specifies panel model, inverter model, system size, projected annual production (kWh), and warranty terms for all components.

Please contact us with the panel name, the spec you believe is incorrect, and the source (manufacturer datasheet URL if available). We take accuracy seriously and will verify and update promptly.